CATL 271Ah LiFePO4 Battery
Specifications:
Product name: CATL 271Ah LiFePO4 Battery
Cell Brand: CATL
Shell material: aluminum
Rated capacity: 271Ah
Minimum capacity: 271Ah
Internal impedance: 0.1 ~ 0.2 mohm
Nominal voltage: 3.2V
Dimensions (L * W * H): 174 * 72 * 207mm
Weight: ≤5.47Kg
Recommend Constant Current: 271A (1C)
End-of-discharge voltage: 2.5V
Recommend Constant Current: 135.5 A (0.5 C)
Charging voltage: 3.65V
Max Continuous Discharge Current: 271A (1C)
Maximum pulse discharge current (short pulse): 3C (cell temperature is lower than 50℃, andWhen SOC>40%, the longest discharge time is 60s, SOC<40%, the longest discharge time is 10s)
Lifetime (80% DOD): 4000 cycles
Charging temperature: -5 ~ 60 ° C
Discharge temperature: -30 ~ 60 ° C
Application:
- Engine start battery, electric bicycle/motorcycle/scooter, golf trolley/baby stroller, electric tools…
- Solar and wind energy systems, RVs, caravans…
- Backup systems, UPS, telecom base station
- Flashlight LED emergency light, solar street light
- Industrial vehicles, such as forklift, AGV. Yacht, trolling motors, etc.
LiFePO4 Battery Charging Guide:
- NEVER charge LiFePO4 batteries with a charger not specifically compatible with LiFePO4 batteries!
- When the cell is first used, it MUST be fully charged and discharged for activating it and giving fully capacity.
- Always charge LiFePo4 batteries in an area with adequate ventilation.
- No matter what charge mode the battery is in, stop charging once the cell temperature exceeds the absolute charge temperature range.
- No matter what charge mode the battery is in, stop charging once the cell voltage exceeds the absolute charge voltage.
- When the LiFePO4 batteries are intended to be stored for a prolonged period of time (more than one month), the SOC of cells should be adjusted to around 50% periodically(every three months is recommended).
Note:
1. One cell will come with one set busbar, bolt, and washer for free. (e.g. 4 Cells will come with 4 pcs(busbars + bolts + washers) .
2. Each cell shall be used under the strict monitor, control, and protection by the BMS.
3. Before the first use, always charge the cells to full voltage.
4. The battery is suitable for DIY lovers with experience.
